Australian Ramp Systems - Technical Information

How to calculate the length of the ramp required
Measure the vertical rise from the door sill to the lowest point your ramp is to end.
Multiply this measurement x 14 and add the level landing size required.

All our ramps are certified to

AS 1428.1 - 2001 Design for access and mobility
AS/NZ 4586 - 1999 Slip resistance
AS 3661.1 - 1993 Slip resistance
AS 1170.1 - 2002 Permanent,
Imposed & Other Loads
AS 1170.2 - 2002 Wind Loads
AS 1664.1 - 1997 Aluminium Structures
AS 1657 - 1992 Fixed Platform and walkways
AS 4100 - 1998 Steel Structures
Gradient 1:14 minimum, can reach 1:20
Handrail height 900mm (1000mm high above 1 metre)
Width 1metre clear walkway or and 1.2 metre clear walkway
Landings 1.2 metre and 1.5 metre (for additional turning space)
300/500 kg load rating
Slip test R10 rating minimum

Warranty
Australian Ramp Systems Pty Ltd, offer a comprehensive ten-year structural guarantee on all Nexus III components when installed correctly in accordance with Australian Ramp Systems installation manual.